Installation Guide

24
TOOLS & PARTS
Carefully remove the tiles or shingles from the “work
area”. Set them aside in the same order or pattern as
when attached to the roof.
1
Select the correct hole cutting template for the tube
(10” or 14”).
2
Use the correct Hole Cutting Template to trace the
diameter of the outer template hole. A nail inserted
into the hole will help guide the template.
3
Drill a hole inside the traced circle to insert saw blade.
TIP
Use a reciprocating/sabre saw to cut the roof hole. .
Use gloves for safety.
4
Gloves
Hole Cutting Template
Power Saw
3
2
1
4
Hole Cutting Template
Hole Cut in Roof Deck
Remove Tiles & Cut Hole
Section-13b
Tile Roof Intallation
Using Formable Aluminum Flashing