Installation Guide
20
Drill
Drill Bit (For Metal)
Gloves
Hole Cutting Template
Power Saw
TOOLS & PARTS
After finding your roof location, drill up through the
roof until it pushes carefully through the panel, on the
roof side. (An assistant on the roof is recommended
during this step.)
1
Start with regular installation instructions beginning in Section 1.
Drill a hole inside the traced circle to insert saw blade.
TIP
Select the correct Hole Cutting Template for the tube
(10” or 14”).
2
Locate the drilled hole. Use the correct Hole Cutting
Template to trace the diameter using the outer
template hole. A nail inserted into the hole will help
guide the template.
3
Use a reciprocating/sabre saw to cut the roof hole.
Use a blade specically for metal cutting. Use gloves
for safety.
4
4
3
2
Hole Cutting Template
Cut Hole In Roof
Section-12a
Metal Roofing Installation