Installation Guide

6
Pull the slider bar closed to verify
the latch and latch hook align properly.
Latch hook can be adjusted as needed
with a hand screwdriver.
TIP: Latch hook can be oriented either
hook up or down to connect with latch.
Drive a 4" bracket screw through the bottom
end cap attachment bracket and the spacers
to secure the bottom of the screen housing
to the doorframe or brick mold.
Insert second housing screw
into decorative housing
flange. Tighten all screws to
hold frame in place.
NARROW DOOR
TRACK MODIFICATION
Measure your door opening and follow the
example below to make your modifications.
After completing the track
modification step, please
return to the standard
assembly process on page 2.
TIP: Small gaps in between tracks
or end caps and the existing brick
mold can be caulked.
EXAMPLE
32" standard door width
- 30" existing door width
= 2" total amount to be cut from
the FLAT ends of the top and
bottom tracks
(Do not cut the notch end of the track)