Installation Guide

5
Drive a 4" bracket screw
through the top end cap
attachment bracket and
spacers provided, securing the
top of the screen housing to
top door frame or brick mold.
TIP: The screen housing must
be installed on the same plane
as the exterior trim. Spacers
can be installed behind the
housing end cap attachment
brackets for support. See the
Spacer Sizing chart for details.
STEP 3
SECURE SCREEN
Insert a housing screw into the pre-drilled screw
hole at the top of decorative housing flange on the
latch side of the slider door to hold frame in place.
Do not tighten completely.
Drive self-drilling 1-1/4"
attachment bracket screws
through the bracket and sill.
Interior View
Center attachment bracket on lower track.
Interior View
.625 .375 .25
.625 .375
.625 .25
.375 .25
+ +
+
+
+
=
=
=
= 1-1/4"
1"
7/8 "
5/8"
Spacer Sizing
Interior View