Installation Guide

STEP 7
Reattach both screen housing end caps starting with
the side with the long black tube. Align black tube with
ridges inside the screen. Make sure slider bar is inside
the end caps before attaching.
STEP 8
Reattach the tracks and snap into place.
STEP 9
Check to ensure that the screen is operating properly
before installing onto the door frame. You may hear a
“pop” when the screen releases.
STEP 10
Place the unit onto the door frame and reinstall all the
screws. Make sure the latch and latch hook are aligned
properly and adjust as needed with a hand screwdriver.
STEP 5
Insert the new screen, making sure to thread the screen
spline through the housing and slider bar channels. Use
caution when inserting so that the screen doesn’t catch
on metal edges.
STEP 6
Reattach the slider bar end caps. Re-insert the screw if
one was removed.