Installation Guide

PAGE 9
Appendix 1:
ZEEL
®
FRAME UNINSTALL INSTRUCTIONS
1. GETTING STARTED
Tools needed: pry bar, hammer, soft cloth, and safety glasses.
Place door with glass frame on a table, or other flat, solid
and stable surface, that is larger than the assembly.
2. POSITION THE PRY BAR
To start, use the flat chamfered end of the pry bar.
Tip: Place a soft cloth under the pry bar to prevent scratching
the glass.
3. WEDGE PRY BAR BETWEEN FRAME AND GLASS
Pry bar may need to be gently tapped with hammer to get
under frame.
4. PUSH DOWN ON PRY BAR TO LIFT UP FRAME
Push down on the pry bar to break apart the tabs holding
the frame together.
Tip: The easiest way to locate a tab is to begin in a corner.
Work slowly around the perimeter of the frame.
Break apart every tab one by one.
Tip: Move cloth around perimeter as you go to avoid
damaging the glass.
5. REMOVE FRAME
Uninstall is now complete. Frame cannot be re-used.
1.
2.
3.
4.
5.