Installation Guide

PAGE 8
Clip and tab
not aligned
Fig.6-C
Clip and tab
aligned
Fig.6-D
6. INSPECT INNER FRAME FOR GAP
• Inspect perimeter of Inner Frame to glass, and Inner Frame
to door, for any gaps. (see Fig. 6-A)
• If gaps are present, repeat step 5.
• If repeating step 5 is not successful and a gap is still
present, a Clip was likely missed. Carefully lift Inner Frame
at gap location (see Fig. 6-B) and attempt to align Tall Tab
into Clip (see clip alignment incorrect Fig. 6-C and correct
Fig. 6-D)
– This can be done but it is difficult. A pry bar may be
needed to gently lift frame – if required see Appendix
#1 for guidance. Then repeat step 5. If a gap cannot be
eliminated and the frame has movement away from door
by hand, the frame will need to be completely removed
and replaced. (Please call our customer service at
1-866-635-4968 for assistance and to order a new frame.)
7. INSPECT OUTER FRAME FOR GAP
• Flip door over so the Outer Frame is up and inspect
perimeter of Outer Frame to glass, and Outer Frame to
door, for any gaps (See Fig. 6-A).
• If gaps are present repeat step 5.
• If repeating step 5 is not successful and a gap is still
present, a Clip was likely missed. Carefully lift Outer Frame
at gap location (See Fig. 6-B) and attempt to align Tall Tab
into Clip (see clip alignment incorrect Fig. 6-C and correct
Fig. 6-D.)
– This can be done but it is difficult. A pry bar may be needed
to gently lift frame – if required see Appendix #1 for
guidance. Then repeat step 5. If a gap cannot be eliminated
and the frame has movement away from door by hand, the
frame will need to be completely removed and replaced.
(Please call our customer service at 1-866-635-4968 for
assistance and to order a new frame)
Please go to
zeel.odl.com/install
to view installation video
Fig.6-A
Fig.6-B