Installation Guide

PAGE 10
616615 • (07/20)
This frame is designed to be painted and/or stained. Use the same high quality exterior grade paint or stain
as used to finish the entry door.
Frame Surface Prep
The frame should be free of any dust and debris. Use mild detergent and water. The frame should be dry
and acclimated to room temperature before applying paint. No other surface prep is necessary for finishing
this frame.
NOTE: DO NOT APPLY ADHESION PROMOTERS or PRIMERS containing adhesion promoter to this frame.
Painting & Staining
Painting: Recommended for use with exterior latex paint. Apply thin coats, allowing paint to dry
between coats, achieve the desired coverage and finish.
Staining: A 2-Step Staining process is recommended for the most desireable level of adhesion.
Step 1 - apply an opaque base coat of paint to the frame, as described above.
Step 2 - apply the stain to the frame. Work stain into the graining with a sponge or cloth.
Wipe off the excess stain for the desired finish. Stain manufacturers instructions may differ or
provide additional information. Please follow their instructions. Apply a compatible clear top
coat to the manufacturers recommendation to protect finish.
FINISHING INSTRUCTIONS
ODL Doorglass Warranty Information
ODL Doorglass is covered by a limited 20 year warranty. Labor is not included in the warranty. The
warranty does not apply to damage from shipping, handling, installation, storage, environmental
conditions, or unusual service conditions or usage.
For warranty information contact:
ODL Customer Service, 215 East Roosevelt Ave., Zeeland, MI 49464.
www.odl.com
1.800.253.3900
WARRANTY INFORMATION