Use and Care Manual

ODL Doorglass is intended to be used as a replacement product.
Existing doorglass must be removed prior to installing this product.
Removal may make the existing doorglass or sidelight unusable.
If you have questions or concerns, consult with an ODL Customer
Service Representative at 800.253.3900 for help.
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
DOORGLASS CONSTRUCTION
ODL Doorglass is made up of three different sections:
OUTSIDE FRAME
& DOORGLASS
MEASURE THE
EXISTING OPENING
1
PAGE 3
FOR 1-3/4" THICK DOORS
MEASURE THE THICKNESS
of the existing door. ODL Door-
glass is designed to FIT DOORS
THAT ARE 1-3/4" ± 1/16" THICK.
MEASURE THE WIDTH AND
HEIGHT
of the existing doorglass.
If the measurements correspond to
the chart, ODL Doorglass will fit your
door.
INSIDE FRAME
The inside frame section with
holes for the attachment screws.
OUTSIDE FRAME AND GLASS INSIDE FRAME WITH SCREWS
The attachment
screws are placed
into the doorglass
from the inside
of the home for
added security.
SCREWS
& SCREW PLUGS
WIDTH AND HEIGHT
NOTE: These instructions reference a 22x36
inch doorglass unit. Your doorglass may be
a different size and style. Regardless, the
process will be the same referenced with
these instructions.
Doorglass
Size
*
Maximum width
of existing frame
Maximum height
of existing frame
22x36 24" 38"
20x36 22" 38"
22x64 24" 66"
20x64 22" 66"
22x48 24" 50"
8x36 10" 38"
8x64 10" 66"
7x64 9" 66"
8x48 10" 50"