Use and Care Manual
INSERT SCREWS
D
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
D. Insert each screw working from side to 
side. Tighten firmly so that the frame 
fits snugly against the door and the seal 
is compressed. Remember to tighten 
the bottom screws. AVOID OVER 
TIGHTENING THE SCREWS to allow the 
window to expand and contract.
F.  If you removed your door from its 
hinges,  place  the  door  back  on  its  hinges. 
Use standard window cleaner to make 
your new doorglass shine.
E. Align the screw plugs with 
the frame profile. Insert and 
tap each one into place.
INSTALLING NEW DOORGLASS CONTINUED
3
C1.  From the outside have a helper tilt the top of 
exterior frame and glass into position against the 
door. With the edge of the exterior frame and 
doorglass snug against the door. 
C2. Align the frames by matching the screw hole guides
PAGE 6
FRAME AND DOODGLASS SNUG AGAINST DOOR
C1 C2
E
PLACE DOOR BACK ON HINGES
F
ALIGN WITH SCREW HOLE GUIDES







