Use and Care Manual

INSERT SCREWS
D
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
D. Insert each screw working from side to
side. Tighten firmly so that the frame
fits snugly against the door and the seal
is compressed. Remember to tighten
the bottom screws. AVOID OVER
TIGHTENING THE SCREWS to allow the
window to expand and contract.
F. If you removed your door from its
hinges, place the door back on its hinges.
Use standard window cleaner to make
your new doorglass shine.
E. Align the screw plugs with
the frame profile. Insert and
tap each one into place.
INSTALLING NEW DOORGLASS CONTINUED
3
C1. From the outside have a helper tilt the top of
exterior frame and glass into position against the
door. With the edge of the exterior frame and
doorglass snug against the door.
C2. Align the frames by matching the screw hole guides
PAGE 6
FRAME AND DOODGLASS SNUG AGAINST DOOR
C1 C2
E
PLACE DOOR BACK ON HINGES
F
ALIGN WITH SCREW HOLE GUIDES