Use and Care Manual

PAGE 5
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
INSTALLING NEW DOORGLASS
3
A1. Have a helper lift the new exterior
doorglass frame and glass into
position from the outside.
A1
LIFT NEW EXTERIOR FRAME/GLASS
INTO POSITION
B1. From the exterior have a helper rest and balance
the doorglass along the bottom of the exterior and
interior frame to ensure that the weight of the glass
is distributed evenly.
The new doorglass should be installed with
the temper stamp at the bottom of the
door and facing inside home.
The screw hole side of your frame should
be installed on the inside of the door.
B2. From the inside insert a screw into each screw hole
at the bottom of the fames only. Tighten screws
about halfway. (Screws will be tightened further in
step 3-D)
A1 A2
A2. At the same time from the inside insert the bottom of the
new interior doorglass frame.
B1
SET AND BALANCE DOORGLASS
INSERT BOTTOM SCREW
B2
LIFT NEW EXTERIOR FRAME/GLASS
INTO POSITION
INSERT BOTTOM OF NEW INTERIOR FRAME