Manualshelf

Use and Care Manual

ManualsBrandsODL ManualsDoor AccessoriesLight-Touch Enclosed Blinds with Low-E Door Glass 20 in. x 64 in. x 1 in. with White Frame Replacement Glass Panel
1234567
PAGE 5
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
INSTALLING NEW DOORGLASS
3
A1. Have a helper lift the new exterior
doorglass frame and glass into
position from the outside.
A1
LIFT NEW EXTERIOR FRAME/GLASS
INTO POSITION
B1. From the exterior have a helper rest and balance
the doorglass along the bottom of the exterior and
interior frame to ensure that the weight of the glass
is distributed evenly.
• The new doorglass should be installed with
the temper stamp at the bottom of the
door and facing inside home.
• The screw hole side of your frame should
be installed on the inside of the door.
B2. From the inside insert a screw into each screw hole
at the bottom of the fames only. Tighten screws
about halfway. (Screws will be tightened further in
step 3-D)
A1 A2
A2. At the same time from the inside insert the bottom of the
new interior doorglass frame.
B1
SET AND BALANCE DOORGLASS
INSERT BOTTOM SCREW
B2
LIFT NEW EXTERIOR FRAME/GLASS
INTO POSITION
INSERT BOTTOM OF NEW INTERIOR FRAME