Installation guide

• Open the application and dialog window
• Right click in the Process column, click
“Pick” then click on the application dialog
window.
NOTE: The “Process” and “Captions” text
boxes will automatically populate with the
application executable file name and dialog
window title.
Manual Layer:
A Manual layer is only referenced by another layer. A
manual layer is called by a display key task. This type of
layer is used to provide access to multiple layers within
an application.
Manual layer creation:
• Create a new Manual layer via the File
menu or right click in the Layers tab
window.
• Input a name for the layer in the Name
column
4.3.4 Layer deletion: Right click on the layer name then click
“Delete”. A window will appear to confirm the action.
4.4 Display Key Task/Layer Assignments
There are 9 Display Keys associated with each layer. Each are shown
in a simulated Display Key window for each device attached.
4.4.1 Assigning an task to a Display Key:
• In the simulated window, under “Configuration & Layer”
section, use the “Current Layer:” drop down list to
select the desired layer the task is to be assigned.
• From the Tasks tab in the DKM, drag and drop the task
image to the desired display key.
• The display key on the simulated device window and
the device will change to the task assigned.
4.4.2 Deleting a task on a Display Key:
Right click on the task in the simulated widow and click
“Delete”.
- 16 -