User's Manual

This product is not suitable for people with disabilities, mental illness or lack of relevant
experience and knowledge [including children (0-12 years old)]. Unless used under the
supervision of their guardians.
Instruction for use
Turning the product on for the first time
To use the toothbrush for the first time, please short press the “On” button, and it will turn on
the toothbrush, and Bluetooth will also be in always-on mode. You can download and install the
“Oclean App", and connect and set the toothbrush in the app. App installation and toothbrush
setup
Scan the QR code to complete the app installation, which will allow you to set various functions
for your toothbrush, such as: Turning on/off the “change brushing area alert after 30 seconds ",
turning on/off the "Automatic Frequency Reduction Tooth Guard" function and etc. In addition,
you can also customize your own brushing program and push the customized program directly to
your toothbrush.
Touch the screen to setup the toothbrush
The toothbrush setup can also be made via the touch screen without connecting to the app. You
can choose between four modes: Cleaning, Massage, Whitening and Sensitive, as well as select
the duration and intensity.
After receiving the pushed brushing program from the app, if any of the mode, intensity or
duration changes are made via the touch screen, then the toothbrush will no longer perform the
previous app-pushed brushing programs.
Timer and brushing area changing alert
The default duration of the brushing program is 2 minutes, with a momentary change in vibration
status every 30 seconds to alert the user of the need to change the brushing area.
Tooth brushing report
After the brushing is done, the product display will show your brushing time, brushing scores,
and tips for blind spot of tooth brushing for the bushing you have just completed.
Brushing Mode Setup
Go to settings by swiping up and down the display or swiping left and right of the screen edge -
e.g.: The “Brushing Mode" setting. The toothbrush will automatically remember the settings once
the setup is completed, and the subsequent operation will follow the new settings.
For the intensity settings, swipe the screen up and down to change the intensity level to "plus 1"
or "minus 1", and swipe the screen edge up and down to change the intensity level to "plus 5" or
"minus 5"
Swipe up and down