Installation Instructions

Instructions
First-Time Use
The toothbrush can be awakened by pressing the
ON/OFF button for the first time on the brand-new
toothbrush. (The Bluetooth function will be
activated and remain on.) After installing the
Oclean App, please enter the app to complete the
connection and settings of the toothbrush.
Install the App and Toothbrush Settings
You can use the app to customize your brushing
programs. It will then complete the process of
tooth cleaning, tooth whitening and gum
massaging automatically in one brushing session.
There is no need to open the Oclean app in the
daily brushing process. Instead, simply open the
app every few days in order to sync the brushing
data.
Direct Use Without App Settings
Without the toothbrush settings in Oclean App, the
toothbrush will default to run for 2 minutes as a
"standard cleaning plan", in which every 30
seconds the toothbrush will remind the user of the
need to change the brush area by vibration, and
will automatically stop running after 2 minutes of
working.
Switch Intensity position during operation
Long press (2 seconds) to change the intensity.
Different numbers of lights represent the high,
medium and low Intensity.
Change Brushing Area
When the toothbrush is working, there will be a
reminder with vibration to remind the user to
change the brushing area every 30 seconds.
Instensity
When the toothbrush is working, the roughly
strength range can be judged according to the
length of the LED indicator. When only one light is
on, means the product is running in a lower
intensity, and when all three lights are on, means
it’s running with a higher intensity.
Low Battery
The indicator flashes when battery percentage is
lower than 20%, needs to be charged to ensure
normal use.
Charging Percentage
When the toothbrush charging, the charging
indicator shows a breathing flashing state. The
charging percentage can be judged according to
the length of the indicator.
The red indicator flashes when battery percentage
is lower than 20%.
One white indicator flashes when battery
percentage is around 20-40%.
Two white indicator flashes when battery
percentage is around 40-70%.
Three white indicator flashes when battery
percentage is around 70-100%.
Three white indicator is on constantly when battery
is full.
Brushing Plan and App Settings
You can either choose or customize a brushing
program through the supporting Oclean app. You
can also upgrade the firmware to continuously
update its performance.