Product Card
Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / sales@oceanled.com Ocean LED USA LLC / Tel +1 954 523 2250 / sales@oceanledusa.com
*Fixture Lumens rating is a measurement of total white light output from a complete (as sold) light fixture
using laboratory standard, calibrated photometric measuring equipment.
5,600 LUMENS / 3,000 FIXTURE LUMENS
Outstanding performance from this small,
bright light makes it the obvious choice for
those who want to stand out from the crowd.
90˚/20˚ BEAM ANGLE
A true wide-angled, focused beam
lights up a large area of the water.
COMPACT AND SIMPLE DESIGN
Made from corrosion resistant Alu Bronze,
there is a lot packed into this 10cm light.
SIMPLE TO INSTALL
12.5mm hole in the hull to feed the
cable through and 3 screws to hold
in place. No bonding required.
EASY TO CLEAN
Thanks to its Tritonium coating, a simple wipe
of the lens removes any underwater growth,
saving hours of scrubbing each time you use it.
ADVANCED MODES
Randomised strobing with fish-strobe
and fade between blue/white. Select
your desired startup colour.
ACTIVE THERMAL CONTROL
ATC prevents overheating. In the event of
overheating the ATC system will reduce the LED
power level in order to protect the LEDs, or in
extreme cases, turn o the fixture completely.
Ø 3.43” (87mm)
Ø 3.93” (100mm)
0.67”
(17mm)
S3124s SPECIFICATIONS
BOX CONTENTS
Sport Series LED Light and Cable
In-line Fuse Kit
Mounting Screws
Quick Install Guide
ACCESSORIES PART
4 Way V DC Power Junction Box 019901
MOUNTING RECOMMENDATIONS
Boat size Up to 65’ (20m)
Transom / Hull spacing 2-4’ (0.5-1.2m)
Transom quantity 2-6
Installation depth
(To top of fixture)
8-10” (20-25cm)
TECHNICAL
Lumens 5600
Fixture Lumens 3000
Typical LED life expectancy 40,000+ Hours
Minimum-Maximum operating voltage
DC
9-32V DC
Current / Amp draw (DC)
(Amperage draw for Colours models
vary by colour selected, this is the
maximum)
12V DC 3.6A
24V DC 1.7A
Driver type
Internal, Reverse
Polarity Protected
PHYSICAL
Total weight 700g
Extension cable length (standard) 9.84’ (3m)
Hole cut-out for cable entry 0.5” (12.5mm)
Material AB2 Aluminium Bronze