Installation Guide

3
IMPORTANT SAFETY PRECAUTIONS!
ATTENTION INSTALLER: This manual contains important information about the installation,
operation and safe use of this product. This information should be given to the owner and/ or operator of
this equipment.
C CAUTION: Risk Group 2 Possibly hazardous optical radiation emitted from this product. Do not
stare at operating lamp. May be harmful to the eye.
CLASS 3: This equipment is designed to operate at voltages of less than 50v DC.
WARNING:
• Before installing your OceanLED Light, read and follow all warning notices and instructions which are
included. Failure to follow safety warnings and instructions can result in property damage, severe injury
or even death.
• Before installing your OceanLED Light, check local laws for restrictions regarding the use of colored
lights in your area.
• Never Use Solvents! Cleaners, fuel, and other products that may contain strong solvents, such as
acetone, that attack many plastics greatly reducing their strength and irreversibly damaging the special
lens coatings and cable sheathings.
DANGER! Risk of electrical shock or electrocution!
This M6/A6 light must be installed by a Licensed Marine Electrician in accordance with ABYC
(American Boat and Yacht Council), NMMA, and any other applicable standards. Improper installation
will create an electrical hazard which could result in death or serious injury to installers, or others and
may also cause damage to property. Always disconnect the power to the light at the circuit breaker
before servicing the light. Failure to do so could result in death or serious injury to serviceman or
others.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
OceanLED INSTALL / M6-A6 / 280417 / v7.0
-