Installation Guide

1 Overview
Power Source
Most installations will utilize on-board 12/24V DC power supply from a marine
battery. However, if AC to DC power supply is being used, allow at least 15% reserve
for voltage fl uctuations due to variables beyond your control such as ambient
temperature and supply voltage fl uctuations to ensure your lights are always
receiving the proper voltage and to ensure the power supply is not “overloaded”
causing premature failure. Use chart below in determining power supplies.
Power Consumption and Recommended Fuse Values
Model Current @ 12V DC Current @ 24V DC
Power
consumption in
Watts
15% reserve in
Watts
Recommended
fuse 12V/24V DC
E3 White 5.5A 2.4A 66W 76W 10A
E3 Blue 5.5A 2.4A 66W 76W 10A
E3 Dual Blue
White
3.6A 1.7A 43W 50W 10A
E3 Multi Colour 5.5A 2.4A 66W 76W 10A
Identifying
your model
Explore E3
Single Colour
Explore E3
Dual Blue / White
Explore E3
Multi Colour
2019 INSTALL & OPERATION MANUAL
EXPLORE E3
4