Operation Manual

41
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
Upon descent to 5 FT (1.5 M) for 5 seconds, operation will enter GAUG Dive Mode.
GAUG DIVE MAIN, information includes (Fig. 110) -
> Current Depth with FT (or M) icon.
> Run Time (hr:min:sec) with graphic TMR (= Timer), 0:00:00 until started, up to 9:59:59; blank if set OFF.
> Elapsed Dive Time (hr:min) with graphic EDT.
> Graphic GAUG (= Mode).
> VARI while ascending.
• S (2 sec) - to access Compass.
• S (< 2 sec) - to acknowledge Alarms.
• S (< 2 sec) - to start/stop Run Timer, if set ON; prevented if acknowledging Alarms.
• A (2 sec) - to reset Run Timer to 0:00:00, if set ON.
• A (< 2 sec) - to access ALT.
• L (press) - to activate Backlight.
GAUG DIVE ALT, information includes (Fig. 111) -
> Max Depth with FT (or M) and MAX icons.
> Time of Day (hr:min sec), with A (or P) if 12 Hour.
> Temperature with ° icon and graphic F (or C).
• 5 sec or A (< 2 sec), revert to Main.
DELAYED VIOLATION 3 (DV3)
Upon descent deeper than the MOD (660 FT/200 M), the Audible will sound and the LED will flash. Also, the Up Arrow will
flash, and Current Depth and Max Depth will only indicate 3 dashes ( - - - ) signifying that you are Out of Range.
Upon ascending above 660 FT (200 M), Current Depth will be restored, however, Max Depth (on ALT 1) will display 3 dashes
for the remainder of that dive. Also, the Log for that dive will display 3 dashes as the Max Depth.
When operating in Digital Gauge Mode, the Depth range is extended to 660 FT (200 M).
DV3 MAIN, information includes (Fig. 112) -
> Up Arrow icon, flashing.
> Current Depth, 3 dashes ( - - - ) flashing, with FT (or M) icon.
> Run Time (hr:min:sec) with graphic TMR, 0:00:00 until started, up to 9:59:59; blank if set OFF.
> Elapsed Dive Time (hr:min) with graphic EDT.
> Graphic TOO DEEP.
> Graphic GAUG (= Mode).
> VARI while ascending.
• S (2 sec) - to access Compass
• S (< 2 sec) - to acknowledge Alarms
• S (< 2 sec) - to start/stop Run Timer, if set ON; prevented if acknowledging Alarms
• A (2 sec) - to reset Run Timer, if set ON
• A (< 2 sec) - to access ALT
• L (press) - to activate Backlight
DV3 ALT, information includes (Fig. 113) -
> Max Depth, 3 dashes ( - - - ), with FT (or M) and MAX icons.
> Time of Day (hr:min sec), with A (or P) if 12 Hour.
> Temperature with ° icon and graphic F (or C).
• 5 sec or A (< 2 sec), revert to Main.
Fig. 110 - GAUG DIVE MAIN
(Run Timer set ON)
Fig. 111 - GAUG DIVE ALT
Fig. 113 - GAUG DV 3 ALT
Fig. 112 - GAUG DV 3 MAIN
(Run Timer set OFF)