Operation Manual
17
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
NORM SURFACE FUNCTIONS
L
closure
M
2 sec
S
2 sec
A
< 2 sec
S
< 2 sec
M
2 sec
M
< 2 sec
A
< 2 sec
Shown is access to NORM from Watch,
then to GAUG from NORM.
Access from NORM to FREE, GAUG to
FREE, GAUG to NORM, FREE to NORM ,
and FREE to GAUG are similar.
M
< 2 sec
M or S
2 sec
DIVE COMPUTER OPERATING MODES
NORM Mode >> for Air and Nitrox SCUBA activity with up to 3 Gases.
GAUG Mode >> for SCUBA activity with Depth/Time indication.
FREE Mode >> for breath hold diving activity with Depth/Time indication.
If no previous dive has been taken within the past 24 hours, NORM is the default upon access from Watch Time. Others accessed as indicated above.
At any time while operating in Surface Modes, operation will enter the Dive Mode selected upon descent to 5 FT (1.5 M) for 5 seconds.
• When Wet Activation is set OFF, Dive Mode will only be activated during operation in a DC Mode. It will not activate while in Watch Mode.
• When Wet Activation is set ON, the selected Dive Mode will activate upon descent regardless of what mode it is operating in at the time.
Post Dive:
Operation will revert from Dive Mode to Post Dive Surface Mode upon ascent to 2 FT (0.6 M) for 1 second.
During the first 10 minutes on the surface after a NORM/GAUG dive, or 1 minute after a FREE dive >>
• The Dive Main will be displayed with Surface Interval time and access to Dive ALT screens.
• A descent during the first 10 minutes after surfacing from a NORM or GAUG dive, or the first 1 minute after surfacing from a FREE dive, is a continu-
ation of that dive.
After the 10 minute (or 1 minute) interval on the surface has elapsed >>
• The Surface Main will be displayed with accessed given to other surface displays.
• A descent is then considered a new dive.
S 2 sec while viewing
the NORM Menu to
revert to SURF Main.
S
< 2 sec
S
2 sec