Operation Manual

DataTrans Plus

5. Press the Advance/Left button once, to display the Time of Day (Fig. 76)

when the dive started.

6. Press the Advance/Left button once more to view the information associ-

ated with nitrogen (Fig. 77). Displayed will be: Log Mode icon, dive Num-

ber, Surface Time between that dive and the one previous to it, lowest

water Temperature during the dive, Elapsed Dive Time, and Maximum

Depth. If the dive shown in the log display was the only one of the day,

Surface Time will represent the time between initial activation and the

beginning of the first dive. Also shown will be the tissue nitrogen loading

at the time you surfaced from the dive (Tissue Loading Bar Graph), the

maximum rate of breathing gas consumption (Gas Consumption Indica-

tor), and the maximum rate of ascent at any time during the dive (Vari-

able Ascent Rate Indicator).

7. Press the Advance/Left button once to view the information associated

with oxygen (Fig. 78). Displayed will be: Log Mode icon, dive Number,

FO2 symbol and the value that FO2 was set at for the dive. If FO2 was

set for a value other than 'Air', the PO2 symbol and value of the maxi-

mum partial pressure of oxygen attained during the dive will also be dis-

played. Also shown will be the oxygen loading (O2 bar graph) at the time

you surfaced from the dive (maximum for that dive or 24 hour period,

whichever was greater at the time). The O2 bar graph will also display

the segment that represents the maximum level of oxygen exposure

(dose) that you achieved during that dive.

8. Press either button to advance to the first screen (Date) of the next dive

Fig. 78 - Log Mode

(fourth screen - oxygen)

DECO

C.Z. C.Z.

NO DECO

Fig. 77 - Log Mode

(third screen - nitrogen)

DECO

C.Z. C.Z.

NO DECO

Fig. 76 - Log Mode

(second screen - time)

DECO

C.Z. C.Z.

NO DECO