Operation Manual

are removed from the Display Module.

Dives are displayed in a reverse sequence that starts with the dive most re-

cently conducted back to the oldest of the 12 dives stored. Thus, your most re-

cent dive will always be the first shown in the sequence.

To eliminate confusion, each dive is separately 'stamped' (identified) with the

date on which it was made and the time of day that the dive started.

Each dive has four log screens that display date, time, nitrogen related data,

and oxygen related data, respectively. To access the Dive Log Mode, follow

this procedure, beginning in Surface Mode:

1. Press the Advance/Left button 3 times to advance to the Log Mode.

MODE:LOG will appear with LOG flashing (Fig. 74).

2. Press the Select/Right button once to select (enter) the Log Mode. If you

accidentally pass Log Mode, press the Select/Right button repeatedly un-

til MODE:LOG appears.

3. The first screen to appear (Fig. 75) will display the most recent dive re-

corded, identified by the Log Mode icon, the dive Number and dive Date .

4. To bypass the dive currently being displayed to view an older dive, press

the Select/Right button until the desired dive is displayed, identified by

the dive number and date of the dive.

Fig. 75 - Log Mode

(first screen - date)

DECO

C.Z. C.Z.

NO DECO

Fig. 74 - Dive Log Mode