Operation Manual

DataTrans Plus

Twelve hours after the last dive, the Surface Mode will disappear from the

screen, and the Fly Mode will be displayed continuously, with the final 12 hour

countdown from 11:59 to 0:00.

WARNING: During the final 12 hours, the DataTrans Plus is in

a countdown mode only, and must be 'activated' by depressing

the Select/Right button prior to start of a dive.

After a surface interval of 12 hours, you may choose to fly (or travel to higher

elevations), provided that your dive profile(s) did not enter decompression. If

your diving involved decompression or a repetitive, multi day profile, it is

strongly recommended that you wait a full 24 hours after your last dive to add

a greater degree of protection. More About Flying After Diving and DAN's

guidelines is presented in the Reference section.

DIVE LOG MODE

Dive Log Mode, identified by the Dive Log icon (Fig. 73a), can be accessed us-

ing the Mode Menu while on the surface. Information from your 12 latest

dives is stored in the log for viewing, giving you the opportunity to record data

in your log book before it is eventually overwritten by subsequent data. After

12 dives are accumulated, each subsequent dive will overwrite the oldest dive

that exists in the log, i.e. the DataTrans Plus will add the most recent dive

while deleting the oldest. Dive log information will be retained when batteries

Fig. 73 - Log Mode Icon

DECO

C.Z. C.Z.

NO DECO