Operation Manual

Language Correction Procedure

If you accidentally selected a language that you do not prefer or understand,

you may find it very confusing to navigate further in the Mode Menu or under-

stand the Message Box warnings (Fig. 51). To correct the language, it is rec-

ommended that you wait 5 minutes to allow the Display Module to default to

the Surface Mode, then carefully perform the following procedure:

1. Press the Advance/Left button 5 times to arrive at the Set Mode.

2. Press the Select/Right button once to enter Set Mode.

3. Press the Advance/Left button 7 times to arrive at the Language sub-

menu.

4. Press the Select/Right button once to select the Language submenu.

5. Press the Advance/Left button as needed until your preferred language

appears.

6. Press the Select/Right button to save the language chosen and return to

the Surface Mode.

Fig. 51 - Language

(Set: Link - German)

DECO

C.Z. C.Z.

NO DECO

Responsible