Operation Manual

it matches that of the current time, and press the Select/Right button to

save the digit shown and move on to the next.

5. Press the Advance/Left button to toggle between AM or PM, and press

the Select/Right button to save the one displayed.

After the time has been set, SET:DATE will appear with DATE flashing. To

set the date, continue with step 4 of the following Set Date procedure, or to re-

turn to the Surface Mode press the Advance/Left button 6 times.

Set Date

Your unit has been factory set for JAN 1 96. To change to the current Date,

follow this procedure, beginning with step 1 if in Surface Mode; or beginning

with step 4, if you just set the Time:

1. Press the Advance/Left button 5 times to advance to the Set Mode.

2. Press the Select/Right button to select the Set Mode.

3. Press the Advance/Left button 2 times to advance to the Date setting.

SET:DATE will appear, with DATE flashing (Fig. 34).

4. Press the Select/Right button to select the Date setting. The date will ap-

pear, with the month flashing (Fig. 35).

5. To set the Date, press the Advance/Left button to change the month, and

ress the Select/Right button to save it. Repeat for the day and year.

Fig. 35 - Set Month

Fig. 34 - Set Date