Operation Manual

DataTrans Plus

DECO

C.Z. C.Z.

PSI

NO DECO

LOW BATTERY CONDITION

Low Battery Icons appear on display to alert you of the need for a battery

change for either the Transmitter (Fig. 107) or Display Module (Fig. 108).

Usually, the DataTrans Plus will only activate if there is enough battery power

to complete one full day of diving. Remaining battery life may also be short-

ened by a sudden change in temperature.

Oceanic strongly advises that you replace the batteries and DO NOT

attempt to dive when either battery icon remains on display, and that

you replace the batteries of the Transmitter and Display Module with

new prior to any multi-day dive trip.

WARNING: Adjusted No Decompression Limits (nitrogen and

oxygen calculation) will be erased when the Display Module

batteries are replaced between repetitive dives. Also, date and

time settings will have to be reset.

BATTERY REPLACEMENT

The following procedure must be closely adhered to whenever replacing the

batteries. Whenever replacing the batteries of the Display Module, it is recom-

mended that you also replace the batteries of the Transmitter, and vice-versa.

Fig. 107 - Low Battery

(Transmitter)

Fig. 108 - Low Battery

(Display Module)

DECO

C.Z. C.Z.

PSI

NO DECO