Operation Manual

DataTrans Plus

AFTER THE DIVE

Soak and rinse the Display Module in fresh water following each dive, and

check the low pressure sensor guard cap to ensure that it is free of any debris

or obstructions. For the transmitter, soak and rinse the regulator in fresh wa-

ter following each dive as you normally would, according to the proper mainte-

nance procedures prescribed for that model. If possible, use lukewarm water

to dissolve any salt crystals. Salt deposits can also be dissolved using a slightly

acidic vinegar/water bath. After removal from a fresh water bath, place the

DataTrans Plus under gently running water and towel dry before storing.

Transport your DataTrans Plus cool, dry, and protected.

WARNING: Never, under any circumstances, poke any object

through any slots or holes of the Display Module. Doing so may

damage the depth sensor, possibly resulting in erroneous depth

and/or dive time remaining displays.

ANNUAL INSPECTIONS & SERVICE

Your DataTrans Plus should be inspected annually by an Authorized Oceanic

Dealer who will perform a factory prescribed function check and inspection for

damage or wear. To keep the 2 year limited warranty in effect, this inspection

must be completed one year after purchase (+/- 30 days). Oceanic recom-