Owners Manual

9
ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY
The optional discharge nozzle kits are used to direct the conditioned air to a specific
target area. By concentrating the airflow, the nozzles increase the air velocity towards
production lines to cool personnel and/or equipment. In server rooms, the nozzles can be
used to direct the airflow through the rack to remove the hot air from the area of the
equipment.
NK-1 for model PWC12, with (2) 4-inch diameter nozzles with an approximate
compressed length of 15 inches. The approximate extended length is 21 inches.
NK-2 for models PWC18, PWC24 with (2) 6-inch diameter nozzles with an
approximate compressed length of 22 inches. The approximate extended length is 32
inches.
2NK-3 for model PWC36 , PWC60 with (2) 8-inch diameter nozzles with an
approximate compressed length of 20 inches. The approximate extended length is 29
inches.
The nozzle kits come pre-assembles with the nozzles secured to a mounting plate, and
with edge guards. By removing the PWC discharge grille, one can insert the nozzle kit
into the opening without the use of tools.
Nozzle Kits