Thermostat Operation Manual

FX-Maxx Operations Manual

OPERATOR CONTROLS AND DISPLAY PANEL

Refer to figure 1for the buttons locations and display functions listed on the following pages.

FX-MaxxDisplay Panel

[::Jt:;i AUTO

~ I;:;'" ~~~

MOISTURE

CONTROL

[ FAN ] .. AUTO

SPEED tm;"? MANUAL

TEMP

ELECT

IIImoo INSIDE

DISCHARGE

I, I SETPOINT ~~

4 3

Figure 1: FX-Maxx ControlButtons and Indicator Displays

1. POWER BUTTON The power button is used to toggle between the on and off modes.

Press the power button once to toggle the unit to the on mode. Press the power button again to

toggle the unit to the off mode.

2. FAN BUTTON Press and release the fan button to advance from auto fan to manual

fan. Press and release the fan button to advance the manual fan speeds, 1 through 6. Press and

release again to return to the automatic fan mode. The selected fan mode is indicated by the

auto and manual fan LED's.

3. UP BUTTON Momentarily press the up button and the set point will appear in the

temperature display. Press and release the up button to increase the set point one degree. The

set point is increased by one degree each time the up button is pressed and released. The high-

est set point allowed is 85° F. The up button is used in conjunction with the down button to dis-

play the outside air temperature when the control is on.

4. DOWN BUTTON Momentarily press and release the down button to display the set

point. Press and release the down button to decrease the set point. The set point is decreased

one degree each time the down button is pressed and released. The lowest set point allowed is

55° Fahrenheit. The down button is used in conjunction with the up button to display the out-

side air temperature when the control is on.

Revision: 03 01/02/98

Page 2

8 -

II'