NOTE: product should be reffered to as ‘KS Voice One’ after first instance. ‘app’ should have lower case A. KitSound VOICE ONE Smart Speaker USER MANUAL Please read this manual carefully before use.
Important Safety Instructions RISK OF ELECTRIC SHOCK DO NOT OPEN 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
WARNING Do not ingest battery, Chemical Burn Hazard The remote control supplied with contains a coin/button battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from childern. If the battery compartment does not close securely, stop using the product and keep it away from children.
Speaker functions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Remote sensor Standby & Microphone mute/unmute Volume dial Tap to Talk LED light ring Mode button (Bluetooth, Line-in and Wi-Fi) Play/Pause/Pair button KS LED Indicator* Microphones WPS button Line-in (aux) USB output (USB charge out) AC mains input (AC 100-240 V – 50/60 Hz 0.5 A) Remote functions 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
LED light ring status Speaker mode Bluetooth Wi-Fi LED colour Blue Turquoise Blue & White White Line-in Green All modes Red All modes (when command is Yellow given) Flashing Disconnected Alexa thinking Alexa talking Wi-Fi disconnect N/A N/A N/A Solid ON Connected Alexa listening Wi-Fi connected Line-in mode Mics off No network connection / not signed into Amazon account Multi-room set up Speaker mode LED colour Master speaker (Bluetooth mode) Blue Master speaker (Line-in) Green Master speaker (Wi-Fi) Wh
Note: The default speaker location (Seattle) needs to be changed to reflect your location. Please read the Amazon Alexa app section after the set up. iOS set up 1. Open up the KS App and select ‘Wi-Fi Setup Wizard’ 2. Select the option that says ‘Settings’ – this will take you to your phone’s settings 3. Connect to the speaker - select Wi-Fi and select the network name that starts with ‘KS Voice One...
4. Connect to your network - choose your home Wi-Fi network and enter the password – click continue Note: If you do not know your home network password it can often be found written on the Wi-Fi router 5. Almost done – please wait a few seconds for the speaker to connect to your chosen network. Once connected, the app screen will show your Wi-Fi connection strength 6. Now choose a name for your KitSound Voice One, you can keep the one it has, or set a custom one.
7. Sign in with your Amazon account details or create an account if you do not have one (see Amazon account set up instructions) 8. Alexa Finally, choose your preferred language for Alexa and confirm. Now you are ready to start talking to 9.
10. Once your speaker set up is complete it will become visible on your device list screen. From this screen you can adjust volume and configure the speaker into groups with other speakers on your network Android set up (Up to version 7) 1. Open up the KS App and select ‘Wi-Fi Setup Wizard’ 2.
4. Almost done – just wait a few seconds for the speaker to connect to your chosen network – once connected the app screen will show your Wi-Fi connection strength 5. Now choose a name for your KitSound Voice One, you can keep the one it has, or set a custom one. If you are using multiple speakers in the home we recommend naming each speaker by location in the home 6.
7. Finally, choose your preferred language for Alexa and confirm. Now you are ready to start talking to Alexa 8. Privacy notice – you can mute the microphones on the KS Voice One by pressing the Microphone Mute button (2) on the speaker or (14) using the remote 9. Once your speaker set up is complete it will become visible on your device list screen.
Android Set Up (Android 8) 1. Open up the KS App and select ‘Wi-Fi Setup Wizard’ 2. Select the option that says ‘Settings’ – this will take you to your phone’s settings 3. Select Wi-Fi and select the network name that starts with ‘KS Voice One... ’- then return to the KS Player App. An Android notification may show an alert explaining this connection does not have internet access. Select ‘yes’ to remain connected and continue set up.
4. Select Network - choose your network and enter the password – click continue Note: If you do not know your home network password it can often be found written on the Wi-Fi router 5. Almost done – please wait a few seconds for the speaker to connect to your chosen network – once connected the app screen will show your Wi-Fi connection strength 6. Now choose a name for your KitSound Voice One, you can keep the one it has, or set a custom one.
7. Sign in with your Amazon account details or create an account if you do not have one (see Amazon account set up instructions) 8. Alexa Finally, choose your preferred language for Alexa and confirm. Now you’re ready to start talking to 9. Privacy notice – you can mute the microphones on the KS Voice One by pressing the Microphone Mute button (2) on the speaker or (14) using the remote 10. Once your speaker set up is complete it will become visible on your device list screen.
Factory reset If your Voice One speaker fails to operate correctly, you can preform a factory reset. 1. 2. The Voice One will say “factory reset”, wait 10 seconds and remove the power cable from AC mains input (12) 3. Plug the power cable back in and the Voice One will say, “powering up for the first time” followed by “Wi-Fi mode” and then “ready for app setup”. The LED light ring (5) will start flashing white 4.
Tunein – Listen to radio stations from around the world iHeartradio – Listen to radio stations from around the world Spotify – Is a music, podcast and video streaming service, log in to use Spotify Connect or voice control your music Tidal - is a music and video streaming service Naspter - is a music streaming service Amazon Alexa – question suggestions and allows you to change the language Edit music services – add or remove services from your main menu Line-in – Listen to music and redistribute across you
Open the Amazon Alexa App and sign in to your existing Amazon account, or follow the steps shown in the ‘Amazon account set up’ section of this manual to create an account. Your Voice One will be listed as a device where you can change your device’s name, device location, time zone and other settings. Changing Speaker Location Many of Alexas most popular skills such as traffic and weather updates are location based.
Music & Books – from here you can access all supported music services available on your KitSound Voice One speaker. Lists – shopping lists and to-do lists created using the KitSound Voice One speaker will be visible here. Use your shopping lists to purchase items from amazon online. Alerts & Alarms – any reminders, timers or alarms created using KitSound Voice One speaker will be visible here. Skills – browse the thousands of Skills that you can enable on your KitSound Voice One speaker.
connected to the same Wi-Fi network as your phone, tablet or PC. All done! Happy listening. Licenses The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses. Remote control We have included a Remote control as an alternative to voice activation. As well as volume and track adjustment, it also features the ability to mute the microphones and wake Alexa ready for a command.
1. To add more KS Voice One Smart Speakers, press the ‘+’ button in the top right corner, and repeat the steps in ‘Connecting to a Wi-Fi network’ 2. To link speakers into one group, hold down the selected device and drag it on top of the device you wish to be the master. You can change the channel of the device by clicking the ‘LR’ button to cycle through ‘L’ (left channel), ‘R’ (right channel) and ‘LR’ (stereo playback). If there is only one speaker in the room you should leave the speaker in ‘LR’ mode 3.
Line-in connection You can also connect music sources to your KitSound Voice One via a wired connection. Once a device is connected using the 3.5 mm aux cable, audio can be streamed over the Wi-Fi network using the KitSound Player App. 1. Connect an audio device to the KitSound Voice One by inserting one end of the 3.5 mm aux cable into your media device and the other end into the Line-in (11) of the speaker 2.
Troubleshooting We hope you’ve now got all the information you need to get started, but if you are having problems with your KitSound product, please feel free to contact us at: support@kitsound.co.uk Amazon Alexa Privacy and Advertising Policy Kondor Ltd is no way affiliated with, or endorsed by any of the skills on the Amazon Alexa system. We do not record any personal information and do not promote any over air advertisements. For more information on Privacy and advertising policy please see www.amazon.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Do not dispose of Lithium coin cell batteries with general waste. Please return it to battery recycling collection point. JB. 5745 / Made in China.
