User's Manual

9
3: Installation
WARNING
Ensure that the EPIRB is mounted away from any strong magnetic
sources such as loudspeakers, compass compensation magnets, etc.
Failure to follow the following installation guidelines may cause the
EPIRB to operate incorrectly.
3.1: Location
The location selected must be sufficiently robust to support the weight of the
complete installation. Exposure to the elements and surrounding hazards,
along with vibration should also be taken into consideration when choosing
the location. Ensure that the mounting location allows easy access to the
EPIRB for maintenance and servicing.
To ensure that the EPIRB will always float free from the sinking vessel ensure
that the float free housing is located high up on the superstructure, free from
any obstructions and located in a position that it will not be trapped,
regardless of the angle the sinking vessel may be in.
Ensure that when mounting the EPIRB, it is mounted with the antenna facing
upwards.
Do not mount the EPIRB closer than 1metre to any steering compass
as this may affect the accuracy of the compass.
Keep the EPIRB away from any strong magnetic sources such as
loudspeakers, compass compensation magnets, etc.
3.2: Float Free Housing
Using the dimensions, indicated above, use the four
N
o
6 x 5/8” screws provided to secure the float free
housing to the chosen structure.
3.2.1: Loading the EPIRB
1) Lift the HRU back.