User's Manual

2) Load the EPIRB, controls facing up, into the location seat, ensuring

to carefully fold the antenna back behind the EPIRB.

3) Gently lower the HRU, this device also clamps the EPIRB in place.

4) Place the housing cover over the back, by placing the locating hole

(on the side of the housing) over the clips.

5) Push and rotate the housing release knob into the locked position.

Note: When replacing the EPIRB in the Float Free Housing please ensure that

the unit is clean and dry. The area around the activation controls and the

lanyard should be free from water and dirt to ensure reliable operation.

3.3: Mounting Cradle

Using the dimensions indicated, use the N

6 x

5/8” screws provided to secure the cradle to the

chosen structure.

The cradle is designed for internal use. If it is

mounted in an external location it is done so at

the user’s discretion.

3.3.1: Loading the EPIRB

Align the back of the lanyard storage area, situated at the rear of the EPIRB,

with the clip mechanism of the cradle and push into place. There will be an

audible “click” indicating that the EPIRB is now secured in place.

25mm

50mm