Install User guide

B: Specifications
30 016-700000-000-02-201301
NIRQuest256-2.1 NIRQuest256-2.5
Corrected linearity: >99.8% >99.6%
Estimated Peak Noise
Equivalent Power (NEP)
(default configuration)
5 pW 25 pW
ELECTRONICS
Power consumption USB power +5V, 0.5 A maximum; DC input jack +5V, 3 A maximum
Data transfer speed: Full scan to memory every 5 ms with USB 2.0 port
Inputs/ Outputs: External trigger input + single strobe output
Breakout box compatibility: Yes
Trigger modes: 2 modes (Normal/Free Run + 1-ms External Hardware Trigger)
Strobe functions: Yes
Gated delay: Yes, with external hardware trigger delay
Connector: 30-pin connector
TEMPERATURE & THERMOELECTRIC COOLING
Temperature limits
(environmental):
10-35 ºC (0-90% non-condensing)
TEC set point (software
controlled):
Control at -20 ºC (up to 45 ºC below ambient)
TEC stability:
+/-0.5 ºC of set temperature in <1 minute; typical long-term stability +/-0.1 ºC
COMPUTER
Operating systems: Windows 2000/XP and Vista (32-bit only); Mac OS X and Linux w/USB
port; any 32-bit Windows OS with serial port
Computer interfaces: USB 2.0 @ 480 Mbps; RS-232 (2-wire) @ 115.2 K baud (custom
configuration)
Peripheral interfaces: I2C inter-integrated circuit; SPI (3-wire)