User's Manual

14
We have already set the channels according to the requirement in
different countries. Choose the country you are staying from the list
to get the correct channel.
The <Europe/United Kingdom> is set by default, press <Enter> on the
Remote controller or push the <Dial> to edit the country selection.
Date and Time
The radio will set your local time automatically after wifi connection. You
can choose to manual set the time if you want. Press the <Tune/Select>
rotary knob to enter into menu, then choose manual set time zone.
Language
English, French, Spanish, Italian, German, and Simplified Chinese are
available.
Local Radio
The radio will detect the radio stations in your local area automatically.
When you press the <Local> button on the radio, you can access the
local radio stations right away, or select <Local Radio> under the
Skytune menu.
You can also set the Local with other country if you want. Go to
<Configuration>, choose <Local Radio> and select <Manual –set
Local Radio> to set other region.
Playback Setup
This is to set the mode of playback under UPnP streaming: Repeat All,
Repeat Once or Shuffle.
DLNA Setup
Our radio supports streaming from DLNA devices and you can rename
your radio for easy recognition by the DLNA servers.
Resume when Power on
This function is ON by default. The radio will resume to the last state of
mode when the radio is power on next time, e.g. if it was playing radio
station before power off, it will resume playing the last listened station
when it is power on the next time.
Dimmer
You can set the display backlight level as you prefer.
There are two settings available: Mode and Level
¢ Mode: Normal or Power Saving
Normal – the display will stay with the same level of brightness all the
time without dim down.
Power Saving – the display will dim down after 15 seconds if no operation
is made on the radio.