User's Manual

12
Music streaming via UPnP
1. Once the UPnP server is configure to share media files with your radio,
you can start music streaming.
2. On the main menu, select <Media Centre> and choose <UPnP>
3. It may take a few seconds for the radio to complete the scan for
available UPnP servers. If no UPnP servers are found, it will show
<Empty List>.
4. After a successful scan is done, select your UPnP server.
5. The radio will show the media categories available from the UPnP
server, e.g. ‘Music’, ‘Playlists’ etc.
6. Choose the media files that you wish to play.
You can set the mode of playback under <Configuration g Playback
setup>.
My Playlist
You can make you own playlist for the UPnP music files. Choose the song
you want to add to playlist, long pressing the Dial until the sign
appears. The song will be added to “My playlist”. You can add up to 99
songs to “My Playlist”.
The UPnP playlist will be erased when the radio is powered off.
Clear My Playlist
Remove all songs in “My Playlist” to allow a new playlist to be prepared.
Alarm Setting
1. Choose <Alarm> from the main menu or press the <Alarm> button on
the remote controller.
2. Select either Alarm 1 or Alarm 2, and choose <Turn on> to activate the
Alarm.
3. Follow the alarm wizard instructions to set the alarm.
The wizard will guide you through the settings below:
Time – Set the time for the alarm
Sound – You can choose <Wake to Radio> or <Wake to Melody> for the
alarm sound.
¢ Wake to Radio – only the preset stations can be used for the radio
alarm (stations from Favorite list).
Please preset your favorite station before setting the alarm.
¢ Wake to Melody- The Melody is default by system.
Repeat – You can schedule the alarm as you desire – Everyday, Once or
multiple days.
Alarm Volume – Adjust the volume of the alarm as you like by rotating the
dial.