User's Manual
Connecting to your WiFi Network
The following screen will appear. You can choose <Yes> to proceed to search for the available
WiFi network. If your router has the WPS function, you can select the <Yes (WPS)> to proceed.
It will then start scanning the network. After the search is done, it will display a list of the
available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi
Protected Access) code. If your network is not configured to be with the WEP or a WPA code,
the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and
configured your network.
Please refer to the “Remote control character list” for you to enter the passwords. Press the
“ ► ” button to go to the next entry, press “ ◄” button to make correction.
The radio will start connecting to the network.
After the router is connected successfully, it will display the menu screen:
You can now start enjoying the internet radio.
01:01
Would you like to
configure Network now?
Yes(WPS) NOYes
Linksys
Homeaudio
Demo
0144
MOVE INPUT OK
Ent er
Password
11
1623
08 58
Internet Radio