User's Manual



2. Turn on

The backlight will not dim down even there is no operation if this option is selected. You can

adjust the backlight level you want.

Display

You can choose the display show in color or Monochrome.

Power Management

This function is to allow the radio to go to Standby if there is no internet signal received in order

to save power. The default setting is 30 minutes, the radio will go into Standby after 30 minutes

when the radio does not receive any internet signal. Other time frame for 5 minutes and 15

minutes are available.

Sleep Timer

You can set the timer to put the radio on standby after certain time elapsed, from 15 minutes to

180 minutes with the step of every 15 minute.

You also can do the setting with the “Sleep” button from remote control, when you press

“Sleep”, then you can see the sleep timer on the top right corner of the display.

Buffer

You can select your preferred buffering time.

Weather

You can set the display of weather forecast on the standby mode and the temperature units.

- You can select Weather Display On/Off and Location.

- Temperature units˖1)Celsius ( C) 2)Fahrenheit ( F)

Local Radio Setup

The radio will detect your local area stations automatically and it will display under the

“Internet radio” you will find all the stations under “Internet radio” “Local Radio”.

If you would like to change the Local area stations to other countries, you can choose “Manual

setup” to make the change.

Playback Setup

You can set up the playback as Off, Repeat one, Repeat all, Shuffle

DLNA Setup

When the radio is connected by other DLNA devices, the name of the radio will appear as

“AirMusic”.

This is the name in default. You can change other name here as you desire.

Please note: The DLNA feature is compatible and works with corresponding third party

Android APPs. Apple devices are not supported.

Equalizer

Select your prefer music effect.

Resume When Power On

This is set to ON or OFF of “ Resume When Power On”.

Software update

Upgrade information will pop up on the display when there is upgrade available on the server.

Reset to default

You can do this factory reset to empty all of the settings and it comes back to default settings.

**Please note all the Station presets, Settings and configuration will be lost after you have

performed the “Factory Reset”.