Use and Care Manual

HOSE

Use to vacuum dry and wet materials on

floor, walls, tapestries, electro-domestic

devices, air conditioning ducts, clothes,

etc.

To clean and/or to dry the interior of the hose and of the

stainless curved wand:

1. Remove the discharge air cover of the OceanBlue

vacuum cleaner and introduce the plastic end of the

hose in it as shown.

2. Then connect the other end of the hose into the

vacuum air intake. Turn on the motor and shake the

hose. Any stuck material in the interior of the hose will

be suctioned and submerged into the water container;

OceanBlue’s hose will also become completely dry,

after vacuuming water.

3. This procedure can also be used before using your

OceanBlue hose for any blowing operation.