Use and Care Manual

10
OPERATION AND HANDLING
General guidelines for using OceanBlue:
Fill up the water container with cold water until it almost covers the top of the central post:
correct quantity of water 2.365 liters (2.5 quarts). (fig.1)
The motor unit is placed on top of the water container (fi g.2). The air intake should be lined up
with the notch in the motor unit. The edge of the motor unit should be firmly rest on the top of
the water container and be inside of the retaining ring for correct location, otherwise, the
machine will not work. Engage the two clamps and raise the upper part of the clamps together.
Place the machine on top of the wheeled base. Note: The clamps will not operate properly if
the motor unit is not in the proper position on the water container. If the clamps do not
operate easily, check the location of the motor unit.
Insert the plastic wand into the curved wand with the OceanBlue hose (fi g.3) until the button
fits in place. Insert the plastic end of the OceanBlue hose into the vacuum air intake as shown
(fi g.4), rotating it to right. To disconnect, rotate it to the left and pull it towards you.