Guide

www.oceanair.co.uk
For further information or measuring assistance, please contact your local Oceanair Distributor:
www.oceanair.co.uk/distributors.
Oceanair Marine (UK): [phone] [e-mail]
Oceanair Marine (US): [phone] [e-mail]
700000074
PORTSHADE
MEASURING GUIDE
You will need
Tape measure.
Measuring guide
Measure both the width and height of the aperture and any trim.
The width of the blind fabric (X) is dened as the width of the
aperture plus 10mm (3/8"). The height of the blind fabric (Y) is
dened as the height of the aperture and any trim plus 50mm
(2"). Ideally the blind will be positioned so that, when stowed, the
pull down bar and mini grip will be clear of the hatch or portlight
and any trim (C).
Ensure that you have sufcient space around the aperture to
accommodate the overall size of the Portshade both vertically
and horizontally (A/B). This area is to be free from obstructions
and away from any heat sources.
Match the blind fabric X and Y measurements with the list of
available sizes below. Always choose a larger size if unsure.
Note the Portshade has a trim clearance of 15mm (5/8") (D).
The product can however be mounted onto raised blocks to
increase clearance.
Ensure that the thickness of the boat structure at the proposed
mounting position is deep enough to prevent the xing screws
from breaking through (E).
Visit www.oceanair.co.uk/portshade for step-by-step
installation instructions.
1
2
3
4
5
B
[=Y+60mm
(2 3/8")]
40mm
(1 9/16")
25mm (1")
24mm
15/16"
20mm
13/16"
15mm
(5/8")
16mm
(5/8")
A [=X+43mm (1 11/16")]
X [= aperture + 20mm (13/16")]
D
E
C
Y
[= aperture + trim + 50mm (2")]
Standard sizes
PART No
FABRIC DIMENSIoNS
X Y
PSH-1
340mm (13 3/8") 280mm (11")
PSH-2
380mm (15") 280mm (11")
PSH-3
460mm (18 1/8") 320mm (12 5/8")
PSH-4
660mm (26") 320mm (12 5/8")
PSH-5
720mm (28 3/8") 320mm (12 5/8")