Guide

www.oceanair.co.uk
For further information or measuring assistance, please contact your local Oceanair Distributor:
www.oceanair.co.uk/distributors.
Oceanair Marine (UK): [phone] [e-mail]
Oceanair Marine (US): [phone] [e-mail]
700000073
SKYSOL
PLEATEDSHADE
MEASURING GUIDE
You will need
Tape measure.
Measuring guide
Measure both the width and height of the aperture and any trim.
The width of the blind fabric (X) is dened as the width of the
aperture plus 20mm (13/16"). The height of the blind fabric (Y) is
dened as the height of the aperture and any trim plus 80mm (3
1/8"), which includes sufcient space (50mm) (2") for the blind to
be clear of the hatch or portlight and any trim when stowed (B).
Ensure that you have sufcient space around the aperture
to accommodate the overall size of the Pleatedshade both
vertically and horizontally. This area is to be free from
obstructions and away from any heat sources.
Match the blind fabric X and Y measurements with the list of
available sizes below. Always choose a larger size if unsure.
The Pleatedshade has an angle suitability of up to 20° from
vertical and a trim clearance of 15mm (5/8") (C). The blind can
however be mounted onto raised blocks to increase clearance.
Ensure that the thickness of the boat structure at the proposed
mounting position is deep enough to prevent the xing screws
from breaking though (D).
Visit www.oceanair.co.uk/pleatedshade for step-by-step
installation instructions.
1
2
3
4
5
50mm
2"
30mm
(1 1/4")
25mm
(1")
10mm
3/8"
15mm
(5/8")
X [= aperture + 20mm (13/16")]
D
C
Y
[= aperture + trim + 80mm 3 1/8")]
Standard sizes
PART No
FABRIC DIMENSIoNS
X Y
PLS -1
381mm (15") 305mm (12")
PLS-2
508mm (20") 305mm (12")
PLS-3
635mm (25") 305mm (12")
PLS-4
762mm (30") 305mm (12")
PLS-5
1016mm (40") 305mm (12")
(B) Pleatedshade stowed Pleatedshade deployed