Operation Manual

Introduction
1
Print Status Notifier 1-1
1 Introduction
1.1 Operating environment
The operating environment of Print Status Notifier is described below.
1.2 Main functions
The main functions of Print Status Notifier are described below.
- Notifies the job information.
If a job such as a print job is monitored and there is a change in the status
of that job, the job information is notified to Print Status Notifier.
The two types of jobs that can be monitored are described below.
–PC Jobs
Jobs output by instructions executed from a computer
– Device Jobs
Jobs output by instructions executed on the operation panel of the
device
- Displays the job history.
The history of the job being monitored can be checked.
- Resumes the job monitor automatically.
If Print Status Notifier is quit while a job is being monitored, the monitored
job that was terminated is automatically resumed when Print Status
Notifier is restarted.
- Displays the device status.
The status of the device registered in Print Status Notifier can be
checked.
- Link to Web Connection
The Web page (Web Connection) that is embedded into the device can
be displayed.
Supported operating
system
• Windows 2000 Professional (service pack 4 or later)
• Windows 2000 Server (service pack 4 or later)
• Windows XP Home/Professional Edition (service pack 2 or later)
• Windows XP Professional x64 Edition
• Windows Server 2003 (Service Pack 1 or later)
• Windows Server 2003 x64 Edition
Used protocol • TCP/IP
• HTTP
• HTTPS
•SNMP v1
Others Microsoft .NET Framework 1.1 must be installed.
The following settings must be enabled on a device with the OpenA-
PI settings.
• OpenAPI settings
• http server settings