Operation Manual

CS250/CS240/CS231 4-79

Administrator mode

TCP Socket Setting

Specify the TCP socket settings. TCP socket is used during data transmissions between the computer

application and the machine.

Reminder

If the TCP socket setting is changed, be sure to turn the machine off, then on again.

When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power)

key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine

on after turning it off; otherwise, the machine may not operate correctly.

If "Enhanced Security Mode" is set to enable, the "Use SSL/TLS" check box is selected.

Note

If a certificate is set to "Enable" from the machine, a page appears so that settings can be specified for

"Use SSL/TLS" and "Port No. (SSL/TLS)". Specify the appropriate settings for SSL communication.

If "TCP Socket" is set to "OFF", it may no longer be possible to use some applications on the computer.

Item Description

TCP Socket Select whether or not TCP socket is used.

Port Number Type in the port number. (Range: 1 to 65535)

Use SSL/TLS and Port No.

(SSL/TLS)

Select whether or not SSL/TLS is used. To use SSL/TLS, select the check box, and

then type in the port number. (Range: 1 to 65535)

TCP Socket (ASCII Mode) Select whether or not TCP socket is used in ASCII mode.

Port No. (ASCII Mode) Type in the port number. (Range: 1 to 65535)