Operation Manual

CS250/CS240/CS231 4-73
Administrator mode
4
2
Note
When the user authentication is set to external server authentication and "NTLM v1" or "NTLM v2" is
selected as the server type, the settings are synchronized and the user authentication changes to
machine authentication if "User Authentication (NTLM)" is set to "OFF". After the setting has changed,
the user authentication setting cannot be changed.
SMB Setting - Print Setting
Specify the settings for SMB printing.
2
Reminder
In order to apply the changes to the settings for "NetBIOS Name", "Print Service Name", and
"Workgroup", restart the machine (turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power)
key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine
on after turning it off; otherwise, the machine may not operate correctly.
Item Description
SMB TX Setting Select whether or not SMB transmission is used.
NTLM Setting Select the NTLM setting.
User Authentication (NTLM) Select whether or not user authentication (NTLM) is used.
Item Description
SMB Print Select whether or not the SMB printing (Windows printing) service is used.
NetBIOS Name Type the NetBIOS name in uppercase letters (up to 15 characters, including only -).
Print Service Name Type the name of the print service in uppercase letters (up to 12 characters, exclud-
ing / and \).
Workgroup Type the name of the workgroup in uppercase letters (up to 15 characters, exclud-
ing " \ ; : , * < > | + = and ?).