Operation Manual

CS250/CS240/CS231 4-69

Administrator mode

Detail

Select the authentication method that is used by the LDAP server being used. For details, refer to the

manual for the LDAP server being used.

If "GSS-SPNEGO" is selected as the authentication method, type in the domain name of Active

Directory.

IPP Setting

Specify the settings for IPP printing.

Use Referral Select whether or not the referral setting is used.

If referral is used, the upper and lower levels are searched with the search base

specified in the LDAP server settings as the starting point.

Initial Setting for Search Details Specify the conditions for performing a detailed LDAP search. Select "OR", "AND",

"STARTS WITH" or "ENDS WITH" for the name, e-mail address, fax number, last

name, first name, city organization and account.

Item Description

IPP Setting Select whether or not IPP printing is used

Printer Name Type in the name of the print server (up to 127 characters).

Printer Location Type in the printer location (up to 127 characters).

The printer location specified here appears in the body of status notification e-mail

message specified with "Status Notification Setting" on the Maintenance tab.

Printer Information Type in the printer information (up to 127 characters).

Printer URI Displays the URI of the printer that can use IPP when printing.

Support Operation Select the print operations supported by IPP.

IPP Authentication Setting Select the "IPP Authentication Setting" check box, and then specify the authenti-

cation method, user name, password and realm setting for IPP connections.