Operation Manual

4
Administrator mode
4-68 CS250/CS240/CS231
Setting Up LDAP
Item Description
No. Displays the number of the LDAP server.
LDAP Server Name Type in the name of the LDAP server.
Server Address Type in the address of the LDAP server. (Format: ***.***.***.*** or FQDN: Range for
***: 0 to 255) The only symbols that can be used are the dash (-) and period (.). To
type in a host name, check the "Please check to enter host name." check box. If
the machine is set to use IPv6, an IPv6 address can also be specified.
Port Number Type in the port number to be used for communication with the LDAP server.
(Range: 1 to 65535)
Enable SSL and Port Number
(SSL)
Select whether or not to use SSL/TLS to communicate with the LDAP server.
Search Base Specify the starting point for LDAP searches (up to 255 characters).
Timeout Type in the amount of time until an LDAP search times out. (Range: 5 to 300 sec-
onds)
Max. Search Results Type in the maximum that can be received as LDAP search results. (Range: 5 to
1000)
Authentication Method Select the LDAP authentication method. The settings that can be specified differ
depending on the selected authentication method. If "anonymous" is selected, it is
not necessary to specify the domain name, logon name and password.
Login Name If any setting other than "anonymous" is selected as the authentication method,
type in the domain name (up to 255 characters).
Password If any setting other than "anonymous" is selected as the authentication method,
type in the password (up to 128 characters).
Domain Name If "GSS-SPNEGO" is selected as the authentication method, type in the domain
name (up to 64 characters).
Select Server Authentication
Method
Select the authentication method for the LDAP server.