Operation Manual

CS250/CS240/CS231 4-63

Administrator mode

E-mail Setting - E-mail RX (POP)

Specify settings when using POP before SMTP for authenticating the e-mail sender.

Item Description

E-mail RX Setting Select whether or not e-mail is received.

POP Server Address Type in the address of the reception POP server. (Format: ***.***.***.*** or FQ DN:

Range for ***: 0 to 255) To type in a host name, select the "Please check to enter

host name." check box. If the machine is set to use IPv6, an IPv6 address can

also be specified.

Before entering a host name, check that the DNS setting is correctly specified.

For details, refer to "TCP/IP Setting - TCP/IP Setting" on page 4-58.

Password Type in the password for logging on to the POP server (up to 15 characters).

APOP Authentication Select whether or not APOP authentication is used.

MDN Response Select whether MDN response is turned on or off.

Connection Timeout Specify the amount of time until communication with the server times out.

Port Number Type in the port number for the server. (Range: 1 to 65535)

Use SSL/TLS and Port No.

(SSL/TLS)

To use SSL/TLS, select the check box. In addition, the port number that is used

can be typed in.

Check for New Messages Select whether or not the server is automatically checked for received e-mail

messages. This appears if the Internet fax operation can be used.

Polling Interval Specify the polling interval. (Range: 1 to 60 minutes) This appears if the Internet

fax operation can be used.