Operation Manual

CS250/CS240/CS231 4-31
Administrator mode
4
Specifying an encryption level setting
1 On the SSL/TLS Setting page, select "Set an Encryption Strength", and then click the [OK] button.
2 Select the encryption level, and then click the [OK] button. The following encryption level settings are
available.
DES, RC4-40, RC4-128, 3DES-168, AES-256 / RC4_128bits, DES_56bits or RC4_40bits /
3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits