Operation Manual

3 Printer Agent Configuration
10
4. Enter the Printer Agent name (e.g., PA1) into the “NDPS Printer
Name” box.
5. Select “Create a New Printer Agent” under “Printer Agent
Source”, and then click the [Create] button.
The Create Printer Agent dialog appears.
6. Enter the Printer Agent name (e.g., PA1) into the “Printer Agent (PA)
Name” box.
7. From the list, according to the syntax
“NDPS_Manager_Name.Context_Name”, select the NDPS manager
started up from the server console.
8. Select “NDPS Gateway (IP)” in the “Gateway Types” box, and then
click the [OK] button to proceed.
To configure the Printer Agent, continue with the instructions in section
3.2.